Cantilever Stacker-Reclaimers
Cantilever-type stacking and reclaiming equipment for bulk stockyards such as longitudinal stockpiles; configuration and supporting scope discussed by yard layout, material characteristics and operating process.
Compiled from confirmed information; models, parameters and delivery scope are subject to confirmed documentation.

Configuration of new machines and retrofits of existing ones, covering the luffing, slewing and travel mechanisms of boom-type machines and the interface between the boom belt and the downstream coal handling system.
Sample characteristics and technical parameters
The following is taken from HaoZhuo's bulk-handling brochure. These are sample configurations, not the full supply range. The final model, parameters and delivery scope follow the documents confirmed by both parties.
Characteristics in the brochure
- Continuous stacking and reclaiming. The brochure describes it as stable and reliable, with high productivity, and as energy-saving and environmentally friendly.
- Travel, slew and luffing are controlled by PLC, for semi-automatic or fully automatic operation.
- For raw-material yards at power plants, ports, steel mills, chemical plants and cement plants, and it can be arranged on a longitudinal yard.
- The brochure overview quotes a rated capacity of about 100–8,000 t/h and a slewing radius of about 20–58 m. Use the model tables below for the listed configurations.
Bucket-wheel and tripper arrangements
- Bucket-wheel types: integral-balance hydraulic luffing, mobile-balance hydraulic luffing, and mobile-balance wire-rope luffing.
- Tripper types: fixed through type, reversible type, full-function double tripper, fixed double tripper with flow splitting, and two-way stacking and reclaiming tripper.
Sample parameters for stackers and reclaimers
Parameters shared by the models below
| Application | Power plants, steel mills, port bulk stacking/reclaiming |
|---|---|
| Luffing speed, up / down, m/min | 3 / 5 |
| Travel speed, m/min | 0–30 |
| Parameter | DH2000/27.75 stacker | D2000/52 stacker | QL3000-45 reclaimer | QL5000-55 reclaimer |
|---|---|---|---|---|
| Reclaiming capacity, t/h | / | / | 3000 | 5000 |
| Stacking capacity, t/h | 2000 | 2000 | / | / |
| Installed power, kW | 250 | 280 | 450 | 750 |
| Bucket-wheel diameter, m | / | / | 8.0 | 9.3 |
| Bucket volume × number, m³ × pcs | / | / | 1.3×8 | 1.6×12 |
| Bucket-wheel speed, r/min | / | / | 6 | 6 |
| Slewing radius, m | 27.75 | 52 | 45 | 55 |
| Slewing speed, r/min | / | 0.03–0.09 | 0.03–0.09 | 0.03–0.09 |
| Slewing angle | / | ±175° | ±175° | ±175° |
Sample parameters for longitudinal-yard stacker-reclaimers
The brochure prints this table in four columns and does not give a product model in the header.
Parameters shared by the models below
| Application | Power plants, steel-mill stockyards, and bulk stacking and reclaiming at ports and terminals |
|---|---|
| Luffing speed, up / down, m/min | 3 / 5 |
| Slewing speed, r/min | 0.03–0.1 |
| Slewing angle | ±110° |
| Travel speed, m/min | 0–30 |
| Parameter | Sample column 1 | Sample column 2 | Sample column 3 | Sample column 4 |
|---|---|---|---|---|
| Reclaiming capacity, t/h | 300 | 800 | 1500 | 2000 |
| Stacking capacity, t/h | 600 | 1200 | 1500 | 2000 |
| Installed power, kW | 200 | 220 | 320 | 400 |
| Bucket-wheel diameter, m | 4.0 | 5.2 | 6.0 | 7.2 |
| Bucket volume × number, m³ × pcs | 0.12×8 | 0.28×9 | 0.37×9 | 0.8×9 |
| Bucket-wheel speed, r/min | 8.17 | 8 | 7 | 6.34 |
| Slewing radius, m | 25 | 30 | 35 | 35 |
Sample parameters for bucket-wheel stacker-reclaimers
Parameters shared by the models below
| Application | Power plants, steel mills, port bulk stacking and reclaiming |
|---|---|
| Luffing speed, up / down, m/min | 3 / 5 |
| Slewing angle | ±110° |
| Travel speed, m/min | 0–30 |
| Parameter | DQ1500/3600-40 | DQ4500/4500-48 | DQ6000/8000-52 | DQ3500/5000-57 |
|---|---|---|---|---|
| Reclaiming capacity, t/h | 1500 | 4500 | 6000 | 3500 |
| Stacking capacity, t/h | 3600 | 4500 | 8000 | 5000 |
| Installed power, kW | 620 | 850 | 1200 | 800 |
| Bucket-wheel diameter, m | 6.6 | 9.3 | 10 | 8.0 |
| Bucket volume × number, m³ × pcs | 0.6×9 | 1.52×12 | 1.52×12 | 0.93×9 |
| Bucket-wheel speed, r/min | 7 | 5.5 | 6.5 | 7 |
| Slewing radius, m | 40 | 48 | 52 | 57 |
| Slewing speed, r/min | 0.03–0.1 | 0.03–0.09 | 0.03–0.06 | 0.01–0.06 |
Repeated boom-belt mistracking cannot be solved by looking at idlers alone
For this type of issue, equipment drawings, operating records and site conditions can inform the scope of inspection, design and retrofit. Causes, measures and responsibilities require site-specific verification.
This is a service scenario, not evidence of a completed project or acceptance result.
Noise at one luffing angle cannot be diagnosed from hydraulic pressure alone
For this type of issue, equipment drawings, operating records and site conditions can inform the scope of inspection, design and retrofit. Causes, measures and responsibilities require site-specific verification.
This is a service scenario, not evidence of a completed project or acceptance result.
Wheel-rail rubbing should not start with changing the wheels
For this type of issue, equipment drawings, operating records and site conditions can inform the scope of inspection, design and retrofit. Causes, measures and responsibilities require site-specific verification.
This is a service scenario, not evidence of a completed project or acceptance result.