Partner products / Chains
HZ-04.03-001
View original edition

Scraper Reclaimer Chains · Edition 2

External- and internal-roller chains for scraper reclaimers handling coal, ore and other bulk materials. Contact us for spare-part selection and replacement quotes.

Scrapers mounted on the chain plates move material from the stockpile to the discharge belt. HaoZhuo can review the existing equipment data to help identify the chain type and replacement interfaces.

Request a chain quote
External-roller plate chain from the catalog, with rollers outside the link plates
External-roller plate chain from the catalog, with rollers outside the link plates

External-roller chain

The rollers are mounted outside the link plates and roll along the guide rails. The supplier catalog describes a self-lubricating configuration with sealed rollers. Lubrication and maintenance requirements depend on the selected configuration and supply documentation.

Internal-roller chain

The rollers sit between the link plates. For replacement, use original drawings or measurements to check pitch, inside width, roller diameter, and fit with the scrapers and sprockets.

Internal-roller plate chain from the catalog, with rollers between the link plates
Internal-roller plate chain from the catalog, with rollers between the link plates

Components and materials listed in the catalog

The catalog lists 40Cr or NM400 and above for link plates, 42CrMo for pins, 20CrMo for bushes, and a Nilos seal configuration. These are catalog examples. Confirm the material grades, heat treatment and inspection requirements in the project documentation.